Megatron’s Range of Slideway oils are specially designed for the lubrication of machine tools slides, feed mechanisms and tables. Blended using highly refined based stocks and special additives, to enhance the critical property of adhesion that reduces stick/slip.

Benefits:

• Good slideway adhesion
• Excellent frictional properties
• Provides high levels of corrosion protection
• Anti-wear additives prevents the wear of critical sliding surfaces
• Can be used on all horizontal and vertical slide ways

Specifications, Approvals & Recommendations:

Megatron slideway range is recommended for lubricating the slide ways of machine tools, planers, lathes and the slides and guides of other types of machines where a tacky, non-corrosive EP lubricant is required.

​

This machine tool lubricant also meets the requirements of hydraulic systems, gear boxes and spindles in most machine tools ad is specially designed for table way lubrication, with emphasis on superior stick-slip properties

Applications:

Megatron Rock Drill Oils are recommended for use in pneumatic rock drill in both underground and surface mining and are suitable for both percussive and rotary type tools. These may also be used in sectors such as quarrying construction tunnelling and excavations. Can be used in Oil mist lubrication, gear and bearing lubrication systems subject to water ingress.

Description:

Megatron Rock Drill Lubricant Range contains effective control emulsions, provide preferential metal wetting properties, as well as providing outstanding anti-wear, rust and corrosion protection, resistance to dieseling, fog control and adhesiveness. The additives have been carefully selected to keep fog generation at an extremely low level and are both non-toxic and non-irritating whilst having a bland, unobjectionable odour. 

Benefits:

• Prevents tool stoppage due to icing and excellent fog control
• No detonation or dieseling. Minimum carbon deposits
• Superior protection against wear and effective lubrication in the presence of water
• Non-toxic at concentrations much higher than the allowable threshold limit for mineral oil fogs

Applications:

Megatron Rock Drill Oils are recommended for use in pneumatic rock drill in both underground and surface mining and are suitable for both percussive and rotary type tools. These may also be used in sectors such as quarrying construction tunnelling and excavations. Can be used in Oil mist lubrication, gear and bearing lubrication systems subject to water ingress.

Description:

Megatron Rock Drill Lubricant Range contains effective control emulsions, provide preferential metal wetting properties, as well as providing outstanding anti-wear, rust and corrosion protection, resistance to dieseling, fog control and adhesiveness. The additives have been carefully selected to keep fog generation at an extremely low level and are both non-toxic and non-irritating whilst having a bland, unobjectionable odour. 

Benefits:

• Prevents tool stoppage due to icing and excellent fog control
• No detonation or dieseling. Minimum carbon deposits
• Superior protection against wear and effective lubrication in the presence of water
• Non-toxic at concentrations much higher than the allowable threshold limit for mineral oil fogs

Applications:

Megatron Rock Drill Oils are recommended for use in pneumatic rock drill in both underground and surface mining and are suitable for both percussive and rotary type tools. These may also be used in sectors such as quarrying construction tunnelling and excavations. Can be used in Oil mist lubrication, gear and bearing lubrication systems subject to water ingress.

Description:

Megatron Rock Drill Lubricant Range contains effective control emulsions, provide preferential metal wetting properties, as well as providing outstanding anti-wear, rust and corrosion protection, resistance to dieseling, fog control and adhesiveness. The additives have been carefully selected to keep fog generation at an extremely low level and are both non-toxic and non-irritating whilst having a bland, unobjectionable odour. 

Benefits:

• Prevents tool stoppage due to icing and excellent fog control
• No detonation or dieseling. Minimum carbon deposits
• Superior protection against wear and effective lubrication in the presence of water
• Non-toxic at concentrations much higher than the allowable threshold limit for mineral oil fogs

Megatron Multi-Purpose Grease is manufactured using highly refined mineral base oils which are carefully selected and then fortified with synthetic polymers, producing a highly shear stable foundation for the grease. This base oil foundation allows the product to perform in applications where light loads and medium speeds are typical.

Megatron Multi-Purpose Grease is manufactured using a lithium calcium thickener resulting in a buttery appearance with excellent shear stability characteristics. In addition, this type of thickener is easily pumped, has a moderate resistance to heat and is exhibits excellent water resistance. The optimal operating conditions for this grease in terms of temperature, is from -30 to 120 degrees Celsius, however short periods of elevated temperatures can be tolerated without severe damage to the product.

Megatron Multi-Purpose Grease is manufactured to a NLGI 2 grade resulting in a grease of medium to soft consistency. The product contains a blend of synthetic tackifiers, increasing its ability to resist water and adherence with all surfaces.

Megatron Multi-Purpose Grease is green in colour and whose formulation includes a full treat of extreme pressure (EP) and corrosion preventative additives enabling the grease to meet or exceed internationally recognised performance standards.

Benefits:

• Very good thermal stability allowing the grease to perform for short periods of time under extreme temperatures, regaining its original texture after cooling to ambient temperature.
• Allows for long periods of storage or non-use in the application without and mechanical breakdown of the grease thickener (e.g. oil separation).
• Exhibits very good to excellent anti-rust and anti-corrosion properties.
• The thickener has very good natural attributes which displace and resist water ingress.
• Exhibits excellent resistance to heat.

Specifications, Performance Standards & Recommendations:

• ASTM D-5864 / CEC L-33-T-82 KP2M-30 (DIN 51825) ISO-L-X-CCIB2 (ISO 6743-9) NLGI GA-LB

• ASTM D-5864 / CEC L-33-T-82
• KP2M-30 (DIN 51825)
• ISO-L-X-CCIB2 (ISO 6743-9) NLGI GA-LB

Megatron CV Joint Grease is manufactured using highly refined mineral base oils which are carefully selected and then fortified with synthetic polymers, producing a highly shear stable foundation for the grease. This base oil foundation allows the product to perform in applications where heavy duty loads are typical.

Megatron CV Joint Grease is manufactured using a lithium thickener resulting in a buttery appearance with excellent shear stability characteristics. In addition, this type of thickener is easy to pump and has an excellent resistance to heat and water. The optimal operating conditions for this grease in terms of temperature, is from -40 to 1500C, however short periods of elevated temperatures can be tolerated without severe damage to the product.

Megatron CV Joint Grease is manufactured to a NLGI 2 grade resulting in a grease of medium to soft consistency. The product contains a blend of synthetic tackifiers, increasing its ability to resist water and adherence with all surfaces.

Megatron CV Joint Grease is black in colour and whose formulation includes a full treat of extreme pressure (EP) and corrosion preventative additives enabling the grease to meet or exceed internationally recognised performance standards. In addition this product is fortified with both molybdenum disulphide and graphite making it suitable for boundary lubrication at high temperatures and/or heavy loads. In the case of accidental overheating, the presence of these materials will still guarantee good lubrication and avoid any jamming or sticking.

Benefits:

• Very good thermal stability allowing the grease to perform for short periods of time under extreme temperatures, regaining its original texture after cooling to ambient temperature.
• Allows for long periods of storage or non-use in the application without and mechanical breakdown of the grease thickener (e.g. oil separation).
• Exhibits very good to excellent anti-rust and anti-corrosion properties.
• The thickener has very good natural attributes which displace and resist water ingress.
• Exhibits excellent resistance to heat.

Specifications, Performance Standards & Recommendations:

• ASTM D-5864 / CEC L-33-T-82
• KPF2N-40 (DIN 51825)
• ISO-L-X-DDIB2 (ISO 6743-9)

Megatron WB Grease is manufactured using highly refined mineral base oils which are carefully selected and then fortified with synthetic polymers, producing a highly shear stable foundation for the grease. This base oil foundation allows the product to perform in applications where heavy duty loads are typical.

Megatron WB Grease is manufactured using a lithium complex thickener resulting in a buttery appearance with excellent shear stability characteristics. In addition, this type of thickener is easy to pump and has an excellent resistance to heat and water. The optimal operating conditions for this grease in terms of temperature is from -40 to 1750C, however, short periods of elevated temperatures can be tolerated without severe damage to the product.

Megatron WB Grease is manufactured to a NLGI 3 grade resulting in a grease of medium to soft consistency. The product contains a blend of synthetic tackifiers, increasing its ability to resist water and adherence with all surfaces.

Megatron WB Grease is tan in colour and its formulation includes a full treat of extreme pressure (EP) and corrosion preventative additives enabling the grease to meet or exceed internationally recognised performance standards.

Benefits:

• Very good thermal stability allowing the grease to perform for short periods of time under extreme temperatures, regaining its original texture after cooling to ambient temperature.
• Allows for long periods of storage or non-use in the application without and mechanical breakdown of the grease thickener (e.g. oil separation).
• Exhibits very good to excellent anti-rust and anti-corrosion properties.
• The thickener has very good natural attributes which displace and resist water ingress.
• Exhibits excellent resistance to heat.

Specifications, Performance Standards & Recommendations:

• KP2P-40 (DIN 51825)
• ISO-L-X-DEIB2 (ISO 6743-9
• NLGI GC-LB

Megatron 5th Wheel Grease is manufactured using highly refined mineral base oils which are carefully selected and then fortified with synthetic polymers, producing a highly shear stable foundation for the grease. This base oil foundation allows the product to perform in applications where heavy duty loads are typical, specifically fifth-wheel hitches used in trailer and trucking applications.

Fifth-wheel hitches must be lubricated in order to minimize wear between the fifth-wheel plate and the trailer to ensure that the trailer can pivot behind the pull vehicle. This allows for increased fuel economy, reduced abnormal steering-component and tire wear and reduces the tendency towards jack-knifing. 

Benefits:

• Outstanding protection against wear and corrosion.
• Waterproof – resists washout.
• Withstands high loads and pressures.
• Provides long service life.

Specifications, Performance Standards & Recommendations:

• KP2N-20 (DIN 51825
• P-64 Fives Cincinnati

Megatron Heavy Duty Graphite EP2 is manufactured using highly refined mineral base oils which are carefully selected and then fortified with synthetic polymers, producing a highly shear stable foundation for the grease. This base oil foundation allows the product to perform in applications where heavy duty loads are typical.

Megatron Heavy Duty Graphite EP2 is manufactured using a lithium thickener resulting in a buttery appearance with excellent shear stability characteristics. In addition, this type of thickener is easy to pump, has an excellent resistance to heat and water. The optimal operating conditions for this grease in terms of temperature, is from -40 to 150 degrees Celsius, however short periods of elevated temperatures can be tolerated without severe damage to the product.

​

Megatron Heavy Duty Graphite EP2 is manufactured to a NLGI 2 grade resulting in a grease of medium to soft consistency. The product contains a blend of synthetic tackifiers, increasing its ability to resist water and adherence with all surfaces.

​

Megatron Heavy Duty Graphite EP2 is tan in colour and whose formulation includes a full treat of extreme pressure (EP) and corrosion preventative additives enabling the grease to meet or exceed internationally recognised performance standards. In addition this product is fortified with graphite making it suitable for boundary lubrication at high temperatures and/or heavy loads. In the case of accidental overheating, the presence of this material will still guarantee good lubrication and avoid any jamming or sticking.

Benefits:

• Very good thermal stability allowing the grease to perform for short periods of time under extreme temperatures, regaining its original texture after cooling to ambient temperature.
• Allows for long periods of storage or non-use in the application without and mechanical breakdown of the grease thickener (e.g. oil separation).
• Exhibits very good to excellent anti-rust and anti-corrosion properties.
• The thickener has very good natural attributes which displace and resist water ingress.
• Exhibits excellent resistance to heat.

Specifications, Performance Standards & Recommendations:

• KPF2N-40 (DIN 51825)
• ISO-L-X-DDIB2  (ISO 6743-9)

Megatron Heavy Duty EP3 Grease is manufactured using highly refined mineral base oils which are carefully selected and then fortified with synthetic polymers, producing a highly shear stable foundation for the grease. This base oil foundation allows the product to perform in applications where heavy duty loads are typical.

Megatron Heavy Duty EP3 Grease is manufactured using a lithium complex thickener resulting in a buttery appearance with excellent shear stability characteristics. In addition, this type of thickener is easy to pump and has an excellent resistance to heat and water. The optimal operating conditions for this grease in terms of temperature is from -40 to 1750C, however, short periods of elevated temperatures can be tolerated without severe damage to the product.

Megatron Heavy Duty EP3 Grease is manufactured to a NLGI 2 grade resulting in a grease of medium to soft consistency. The product contains a blend of synthetic tackifiers, increasing its ability to resist water and adherence with all surfaces.

Megatron Heavy Duty EP3 Grease is Tan in colour and its formulation includes a full treat of extreme pressure (EP) and corrosion preventative additives enabling the grease to meet or exceed internationally recognised performance standards.

Benefits:

• Very good thermal stability allowing the grease to perform for short periods of time under extreme temperatures, regaining its original texture after cooling to ambient temperature.
• Allows for long periods of storage or non-use in the application without and mechanical breakdown of the grease thickener (e.g. oil separation).
• Exhibits very good to excellent anti-rust and anti-corrosion properties.
• The thickener has very good natural attributes which displace and resist water ingress.
• Exhibits excellent resistance to heat.

Specifications, Performance Standards & Recommendations:

• KP2P-40 (DIN 51825)
• ISO-L-X-DEIB2 (ISO 6743-9
• NLGI GC-LB

Super High Temperature Grease is manufactured using highly refined mineral base oils which are carefully selected and then fortified with synthetic polymers, producing a highly shear stable foundation for the grease. This base oil foundation allows the product to perform in applications where heavy duty loads are typical.

Super High Temperature Grease is manufactured using an inorganic clay based thickener resulting in a buttery appearance with excellent shear stability characteristics.  In addition, this type of thickener is easily pumped, has an excellent resistance to heat and is exhibits excellent water resistance. The optimal operating conditions for this grease in terms of temperature, is from -30 to 205 0C, however short periods of elevated temperatures can be tolerated without severe damage to the product.

Super High Temperature Grease is manufactured to a NLGI 2 grade resulting in a grease of medium to soft consistency. The product contains a blend of synthetic tackifiers, increasing its ability to resist water and adherence with all surfaces.

Benefits:

• Very good thermal stability allowing the grease to perform for short periods of time under extreme temperatures, regaining its original texture after cooling to ambient temperature.
• Allows for long periods of storage or non-use in the application without and mechanical breakdown of the grease thickener (e.g. oil separation).
• Exhibits very good to excellent anti-rust and anti-corrosion properties.
• The thickener has very good natural attributes which displace and resist water ingress.
• Exhibits excellent resistance to heat.

Specifications, Performance Standards & Recommendations:

• ASTM D-5864 / CEC L-33-T-82
• KP2S-30 (DIN 51825)
• ISO-L-X-CGIB2 (ISO 6743-9)

Megatron Agri Super 15W-40 is specifically designed to provide the farmer with ONE top quality, multigrade, multifunctional lubricant that reduces the chances of misapplication and considerably reduces inventory costs. Blended with superior additives that ensures unique load carrying properties that is vital to improve power, increase powertrain performance and eliminate wet brakes chatter.

Benefits:

• One multifunctional product reduces inventory and chances of misapplication.
• Exceptional soot dispersancy, preventing deposits on critical engine components.
• Good rust and corrosion inhibition resulting in reduced wear and longer equipment lifespans especially on hydraulic components.

Specifications, Performance Standards & Recommendations:

• ACEA E3
• FORD M2C 159B/C
• JOHN DEERE J27
• NEW HOLLAND 82009201/2/3
• MF CMS M1144,1145,1139
• ZF TE ML 06A,B,C & 07B

A high quality, multifunctional, extreme pressure fluid to meet the service top-up and refill needs of transmissions, final drives, hydraulic and power-steering systems and fluid immersed disc brakes of virtually all farm and industrial tractors and mobile equipment, especially where many components must be satisfied with a fluid from a common source. Megatron Hydraulic Agrifluid UTTO has a viscosity grading of SAE 10W-30 engine oil along with a high viscosity index to minimise viscosity changes with changing temperatures. It is extremely stable even in severe high-temperature torque-converter use and has excellent anti-wear properties. Frictional properties are designed to assure proper, decisive functioning of multi-disc clutches used in some transmission designs requiring a limited slip function and in oil immersed disc brakes.

Specifications, Performance Standards & Recommendations:

• John Deere : JDM J20C/J20D
• CNH : MAT 3525 (“134-D” fluid)
• Massey Ferguson : CMS M1141, CMS M1143
• VCE : WB 101
• ZF : TE-ML-03E & TE-ML-05F

Benefits:

• Maximum protection against wear and corrosion
• Good anti-chatter in wet brake systems
• Excellent oxidation stability
• Compatibility with seals and elastomer materials in tractors 

A high quality, multifunctional, extreme pressure fluid to meet the service top-up and refill needs of transmissions, final drives, hydraulic and power-steering systems and fluid immersed disc brakes of virtually all farm and industrial tractors and mobile equipment, especially where many components must be satisfied with a fluid from a common source. Megatron Agri 80W has a high viscosity index to minimise viscosity changes with changing temperatures. It is extremely stable even in severe high-temperature torque-converter use and has excellent anti-wear properties. Frictional properties are designed to assure proper, decisive functioning of multi-disc clutches used in some transmission designs requiring a limited slip function and in oil immersed disc brakes.

Specifications, Performance Standards & Recommendations:

• John Deere : JDM J20C/J20D
• CNH : MAT 3525 (“134-D” fluid)
• Massey Ferguson : CMS M1141, CMS M1143
• VCE : WB 101
• ZF : TE-ML-03E & TE-ML-05F

Benefits:

• Maximum protection against wear and corrosion
• Good anti-chatter in wet brake systems
• Excellent oxidation stability
• Compatibility with seals and elastomer materials in tractors 

These are speciality Lubricants containing superior additives to prevent fling off, protect against rust, minimises wear, prevents excessive heating and provides maximum lubrication protection under all operating conditions. It is compatible will all normal oil seal materials making Megatron Cutter Bar Lubricant Range an outstanding all-round lubricant to use on high performance chainsaws.

Benefits:

• Excellent lubrication
• Super adhesive and cohesive properties