Megatron® Engine Crankcase Oils 15W-40 CI-4+
Availability: In Stock
Megatron 15W-40 CI-4+ is an advanced high performance SAE 15W-40 diesel multigrade engine oil designed to meet and exceed the highest practical performance level requirements of engines under extreme conditions. It ensures excellent control over soot induced wear, high temperature piston deposits, corrosion and foaming. It provides excellent resistance to bore polishing, a high level of wear protection and ensures superior engine cleanliness at extended drain intervals.
Benefits:
- Excellent performance with extended oil drain intervals on low emission engines.
- Reduced evaporative loss of lubricants due to the selection of high quality base oils.
- Excellent TBN retention effectively neutralizing the acid by-products of combustion.
- Superior deaeration and anti-foam characteristics for accurate operation of hydraulically actuated fuel injection systems.
Specifications, Performance Standards & Recommendations:
- Daimler MB 228.31
- ACEA E7 -12
- MTU Type 2.1
- DDC 93k218
- JASO DH-1,2
- Volvo VDS-4
- MAN M3575
- Global DHD -1
- CAT ECF -2, 3
- New
Megatron® Monograde Automotive Engine Lubricant Range
Availability: In Stock
Megatron range of monograde motor oils is intended for passenger cars, light trucks and bakkies as well as certain farm equipment, where conventional single grade oils are preferred. These oils have good lubricating properties and will provide satisfactory protection against wear and oxidation and prolong engine life.
Benefits:
Benefits:
- Provides excellent lubrication.
- Keeps engines clean.
- Prolongs engine life.
- Cost effective.
Specifications, Performance Standards & Recommendations:
- SF/CF
- New
Megatron® Engine Crankcase Oil 20W-50 SF/CF
Availability: In Stock
Megatron Multigrade 20W-50 SF/CF is a heavy duty engine crankcase oil suitable for use in older, high mileage vehicles. It provides excellent benefits during starting and warm-up as compared to monograde oils and exhibits extraordinary high temperature performance by providing a thicker oil film on bearing surfaces as well as a better sealing of piston rings.
Benefits:
Benefits:
- Delivers excellent detergency and dispersancy characteristics reducing the build-up of sludge.
- Advanced protection against viscosity and thermal breakdown.
- Provides excellent deposit, oil oxidation, wear and rust control in petrol and diesel engines.
Specifications, Performance Standards & Recommendations:
- SF/CF
- New
Megatron® Engine Crankcase Oil SAE 30 - SF/CF
Availability: In Stock
Megatron range of monograde motor oils is intended for passenger cars, light trucks and bakkies as well as certain farm equipment, where conventional single grade oils are preferred. These oils have good lubricating properties and will provide satisfactory protection against wear and oxidation and prolong engine life.
Benefits:
Benefits:
- Provides excellent lubrication.
- Keeps engines clean.
- Prolongs engine life.
- Cost effective.
Specifications, Performance Standards & Recommendations:
- SF/CF
- New
Megatron® Engine Crankcase Oil SAE 40 - SF/CF
Availability: In Stock
Megatron range of monograde motor oils is intended for passenger cars, light trucks and bakkies as well as certain farm equipment, where conventional single grade oils are preferred. These oils have good lubricating properties and will provide satisfactory protection against wear and oxidation and prolong engine life.
Benefits:
Benefits:
- Provides excellent lubrication.
- Keeps engines clean.
- Prolongs engine life.
- Cost effective.
Specifications, Performance Standards & Recommendations:
- SF/CF
- New
Megatron® Engine Crankcase Oils SAE 50 - SF/CF
Availability: In Stock
Megatron range of monograde motor oils is intended for passenger cars, light trucks and bakkies as well as certain farm equipment, where conventional single grade oils are preferred. These oils have good lubricating properties and will provide satisfactory protection against wear and oxidation and prolong engine life.
Benefits:
Benefits:
- Provides excellent lubrication.
- Keeps engines clean.
- Prolongs engine life.
- Cost effective.
Specifications, Performance Standards & Recommendations:
- SF/CF
- New
Ultron® Engine Crankcase Oil SYN SAE 5W30 SN/CF
Availability: In Stock
Ultron 5W-30 SN/CF is a fully synthetic high performance engine oil especially developed for use in the latest high performance engines. It provides exceptional oxidation stability and outstanding engine cleanliness. Blended to a high viscosity index, ensuring low wear rates and excellent protection of engine components during extreme temperature variations.
Benefits:
Benefits:
- Optimal oil consumption due to inherent low volatility.
- Improved fuel economy and power output.
- Superior lubrication – reduced wear and increased engine life.
- Reduced emissions.
- Exceptional engine cleanliness.
Specifications, Approvals & Recommendations:
|
|
- New
Ultron® Engine Crankcase Oil SYN SAE 5W40 SN/CF
Availability: In Stock
ULTRON 5W-40 is a fully synthetic engine oil designed for use in automotive engine applications that recommends a designation of SN/CF. The advanced additive package provides enhanced protection against the formation of sludge and deposits which in turn increases engine efficiency and extends engine life.
Benefits:
Benefits:
- Exceptional low temperature performance
- Superior wear and corrosion protection by helping to neutralise corrosive combustion acids.
- Extended oil- drain intervals, resulting in longer life
Specifications, Performance Standards & Recommendations:
|
|
- New
Ultron® Engine Crankcase Oils SYN SAE 10W40 SL/CI4
Availability: In Stock
Ultron 10W-40 is a high performance, semisynthetic, heavy duty diesel engine oil. It is manufactured with outstanding quality base oils and high performance additives which allow low temperature fluidity. Optimal thermal stability, very low volatility, constant engine performance and excellent protection of all parts and components.
Key Advantages:
Key Advantages:
- Excellent low temperature properties – immediate protection on start-up.
- Optimal oil consumption due to inherent low volatility.
- Improved fuel economy and power output.
- Superior lubrication – Reduced wear and increased engine life.
- Reduced emissions.
- Exceptional engine cleanliness.
Specifications, Performance Standards & Recommendations:
|
|
- New
Megatron® GEAR OIL EP 90 GL5
Availability: In Stock
Premium quality range containing sulphur-phosphorous EP additives developed to meet the rigorous demands of commercial fleet manual transmissions, drive axles and final drives. They are also suitable for similar components of farm and contactor equipment and passenger cars and when properly applied at the intervals recommended by car manufacturers,
Benefits:
Benefits:
- Resistance to high temperature oxidation providing extended drain capability.
- Protection against wear and scoring under all operating conditions, high speed, high torque and shock loading.
- High load carrying capability ensures gears operating under high loads are protected thus prolonging component life.
Specifications, Performance Standards & Recommendations:
|
|
- New
Megatron® GEAR OIL 80W90 GL5
Availability: In Stock
Premium quality range containing sulphur-phosphorous EP additives developed to meet the rigorous demands of commercial fleet manual transmissions, drive axles and final drives. They are also suitable for similar components of farm and contactor equipment and passenger cars and when properly applied at the intervals recommended by car manufacturers,
Benefits:
Benefits:
- Resistance to high temperature oxidation providing extended drain capability.
- Protection against wear and scoring under all operating conditions, high speed, high torque and shock loading.
- High load carrying capability ensures gears operating under high loads are protected thus prolonging component life.
Specifications, Performance Standards & Recommendations:
|
|
- New
Megatron® GEAR OIL 85W140 GL5
Availability: In Stock
Premium quality range containing sulphur-phosphorous EP additives developed to meet the rigorous demands of commercial fleet manual transmissions, drive axles and final drives. They are also suitable for similar components of farm and contactor equipment and passenger cars and when properly applied at the intervals recommended by car manufacturers,
Benefits:
Benefits:
- Resistance to high temperature oxidation providing extended drain capability.
- Protection against wear and scoring under all operating conditions, high speed, high torque and shock loading.
- High load carrying capability ensures gears operating under high loads are protected thus prolonging component life.
Specifications, Performance Standards & Recommendations:
|
|
- New
Megatron® GEAR OIL EP 90 GL4
Availability: In Stock
This range contains Extreme Pressure additives comprising of Sulphur – Phosphorous technology that is specially recommended for synchromesh transmissions proven to provide full protection to bronze components, ensuring reliable operation and smooth gear changes.
Benefits:
Benefits:
- Good anti-wear and load carrying characteristics that extends the life of components.
- Excellent high and low temperature performance compared to monograde gear oils.
- Improved protection against rust and corrosion.
Specifications, Performance Standards & Recommendations:
- US STEEL224
- 51517 Part III
- ZF-TE-ML
- MT-1
- New
Megatron® GEAR OIL 75W90 GL4
Availability: In Stock
This range contains Extreme Pressure additives comprising of Sulphur – Phosphorous technology that is specially recommended for synchromesh transmissions proven to provide full protection to bronze components, ensuring reliable operation and smooth gear changes.
Benefits:
Benefits:
- Good anti-wear and load carrying characteristics that extends the life of components.
- Excellent high and low temperature performance compared to monograde gear oils.
- Improved protection against rust and corrosion.
Specifications, Performance Standards & Recommendations:
- US STEEL224
- 51517 Part III
- ZF-TE-ML
- MT-1
- New
Megatron® GEAR OIL 75W90 GL5
Availability: In Stock
Premium quality range containing sulphur-phosphorous EP additives developed to meet the rigorous demands of commercial fleet manual transmissions, drive axles and final drives. They are also suitable for similar components of farm and contactor equipment and passenger cars and when properly applied at the intervals recommended by car manufacturers,
Benefits:
Benefits:
- Resistance to high temperature oxidation providing extended drain capability.
- Protection against wear and scoring under all operating conditions, high speed, high torque and shock loading.
- High load carrying capability ensures gears operating under high loads are protected thus prolonging component life.
Specifications, Performance Standards & Recommendations:
|
|
- New
