CONDUCTOR: Aluminium STRANDING: Class 2
INSULATION: XLPE METALLIC SCREEN: Copper Wire Screen
OUTERSHEATH: MDPE OUTERSHEATH COLOUR: Black
RATED VOLTAGE: 19/33kV MINIMUM BENDING RADIUS: 20 x Overall Diameter
STANDARDS: BS7870-4.10
CONDUCTOR: Plain Copper STRANDING: Class 2
INSULATION: XLPE METALLIC SCREEN: Plain Copper Taped Screen
BEDDING: LSZH ARMOUR: Aluminium Wire Armour
OUTERSHEATH: LSZH OUTERSHEATH COLOUR: Red
RATED VOLTAGE: 6.35/11kV MINIMUM BENDING RADIUS: 15 x Overall Diameter
OPERATING TEMPERATURE: 90°C
STANDARDS: BS7835, BS EN 60332-1-2.
CONDUCTOR: Plain Copper STRANDING: Class 2
INSULATION: XLPE METALLIC SCREEN: Plain Copper Taped Screen
BEDDING: PVC ARMOUR: Aluminium Wire Armour
OUTERSHEATH: PVC OUTERSHEATH COLOUR: Red
RATED VOLTAGE: 6.35/11kV MINIMUM BENDING RADIUS: 15 x Overall Diameter
OPERATING TEMPERATURE: 90°C
STANDARDS: BS6622, BS EN 60332-1-2.
CONDUCTOR: Plain Copper STRANDING: Class 2
INSULATION: XLPE METALLIC SCREEN: Plain Copper Taped Screen
BEDDING: LSZH ARMOUR: Steel Wire Armour
OUTERSHEATH: LSZH OUTERSHEATH COLOUR: Red
RATED VOLTAGE: 6.35/11kV
CORE IDENTIFICATION: Coloured Tapes: Brown, Black, Grey
MINIMUM BENDING RADIUS: 12 x Overall Diameter
OPERATING TEMPERATURE: 90°C STANDARDS: BS7835, BS EN 60332-1-2
DE-RATING FACTORS
DIMENSIONS
CONDUCTOR: Aluminium
STRANDING: Class 2 INSULATION: XLPE
METALLIC SCREEN: Plain Copper Taped Screen BEDDING: PVC
ARMOUR: Steel Wire Armour OUTERSHEATH: PVC
OUTERSHEATH COLOUR: Red RATED VOLTAGE: 6.35/11kV
CORE IDENTIFICATION: Coloured tape, Black, Brown & Grey
MINIMUM BENDING RADIUS:
Single core cables: 20 x overall diameter, Multi-core cables: 15 x overall diameter
OPERATING TEMPERATURE: 90°C
STANDARDS:
BS6622: Power cables, thermosetting polymer insulated high voltage IEC60502-2: Power cables with extruded insulation and their accessories for rated voltages from 6kV to 30kV (Um=36kV) Flame Propagation to BS EN 60332-1-2
CONDUCTOR: Plain Copper
STRANDING: Class 2 INSULATION: XLPE
METALLIC SCREEN: Plain Copper Taped Screen BEDDING: PVC
ARMOUR: Steel Wire Armour OUTERSHEATH: PVC
OUTERSHEATH COLOUR: Red RATED VOLTAGE: 6.35/11kV
CORE IDENTIFICATION: Coloured Tapes: Brown, Black, Grey
MINIMUM BENDING RADIUS: 15 x Overall Diameter
OPERATING TEMPERATURE: 90°C
STANDARDS: BS 6622, IEC/EN 60228
DE-RATING FACTORS
ELECTRICAL CHARACTERISTICS
DIMENSIONS
CONDUCTOR: Aluminium STRANDING: Class 2
INSULATION: XLPE METALLIC SCREEN: Copper Wire Screen
ARMOUR: Plain Copper Wire Braid OUTERSHEATH: MDPE
OUTERSHEATH COLOUR: Red RATED VOLTAGE: 6.35/11kV
STANDARDS: BS7870-4.10
CONDUCTOR: Aluminium STRANDING: Class 2
INSULATION: XLPE METALLIC SCREEN: Aluminium Wire Screen
OUTERSHEATH: MDPE OUTERSHEATH COLOUR: Red
RATED VOLTAGE: 6.35/11kV STANDARDS: IEC 60228, IEC 60502-2, IEC 60754-1
CONDUCTOR : Tinned Copper STRANDING: Class 5
INSULATION: EPDM OUTERSHEATH: EPDM
OUTERSHEATH COLOUR: Light Blue RATED VOLTAGE: 450/750v
CORE IDENTIFICATION:
Single core - Black
4 core - Green/Yellow, Brown, Black, Grey
MINIMUM BENDING RADIUS:
Fixed: 3 x overall diameter / Flexed: 5 x overall diameter
OPERATING TEMPERATURE:
Temperature Rating: -25°C to +90°C / Maximum Water Temperature: +80°C
STANDARDS:
WRAS approved Certificates available on request
ELECTRICAL CHARACTERISTICS
Conductor temperature: +90°C
Ambient air/water temperature: +30°C
CONDUCTOR: Tinned Copper STRANDING: Class 6
INSULATION: EPR OUTERSHEATH: CSP
OUTERSHEATH COLOUR: Black, Orange
MINIMUM BENDING RADIUS: Overall Bending Radius 6x
OPERATING TEMPERATURE: 85°C
STANDARDS:
BS638 part 4 * (withdrawn). EN 60228 Flame Retardant according to IEC/EN 60332-1-2
DE-RATING FACTORS
The above table is in accordance with Table A.7 of BS 638 Part 4
ELECTRICAL CHARACTERISTICS Duty Cycle and Current Carrying Capacity The current carrying capacity of a welding cable depends on the length of the duty cycle. The duty cycle is the length of time during which a loaded current passes through the cable over an operation
CURRENT CARRYING CAPACITY
Class 5 Flexible Copper Conductors for Single Core and Multi-Core Cables
CONDUCTORS
Class 6 Flexible Copper Conductors for Single Core and Multi-Core Cables
DIMENSIONS
Type 0361TQ - Tinned Copper Conductors
period of 5 minutes, expressed as a percentage of that period. For example, if the current is flowing for the whole 5 minutes the duty cycle is 100%, and if the current is flowing for 1 minute the duty cycle is 20%. As conductor temperature varies according to the time in use as well as current, ratings shown are given as a guide. The permissible loading of the cable for duty cycles other than those shown in the table can be calculated using the following formula: I = I100 x √100/F Where: I: is the maximum permissible loading current for the required duty cycle. I 100 : is the maximum permissible loading current for a duty cycle of 100%. F : is the required duty cycle calculated as a percentage of the 5 minute operation period. Typical guidance values for different welding processes are as follows: Fully automatic welding 100% Semi-automatic welding 65 - 85% Manual welding 30 - 60% Very infrequent or occasional welding 20%
CONDUCTOR: Plain Copper INSULATION: PVC
OUTERSHEATH COLOUR: Black, Red RATED VOLTAGE: 750V
MINIMUM BENDING RADIUS: Overall Bending Radius 6x
OPERATING TEMPERATURE: 70°C
STANDARDS:
IEC60331: Tests for electric cables under fire conditions - circuit integrity IEC60332-1: Tests on electric and optical fibre cables under fire conditions Part 1: test for vertical flame propagation for a single insulated wire or cable BSEN50265: Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cables
CONDUCTOR: Tinned Copper STRANDING: Class 5
INSULATION: Silicone OUTERSHEATH: Silicone
OUTERSHEATH COLOUR: Black, White, Red
CORE IDENTIFICATION:
2 core: brown & blue
3 core: brown, blue & green/yellow
4 core: brown, black, grey & green/yellow
5 core: brown, blue, black, grey & green/yellow
Six core and above: Black core with white numerals
MINIMUM BENDING RADIUS:
Fixed: 5 x overall diameter / Flexed: 15 x overall diameter
OPERATING TEMPERATURE: Fixed: -60°C to +180°C
STANDARDS: HD22.1 ÷ EN 50363 ÷ EN 60228
CONDUCTOR: Tinned Copper
STRANDING: Class 5 OUTERSHEATH COLOUR: Black, Red
MINIMUM BENDING RADIUS: 4 x Overall diameter
OPERATING TEMPERATURE: -40°C to +90°C
STANDARDS:
EN 50618:2014 – Electric cables for photovoltaic systems (BT(DE/OT)258)
CONDUCTOR: Plain Copper STRANDING: Class 1
OUTERSHEATH COLOUR: Black
MINIMUM BENDING RADIUS: 10 x overall diameter
OPERATING TEMPERATURE:
0°C to +40°C* (*Maximum continuous temperature of standard jelly compound)
STANDARDS: Generally complies with BT Specification CW1128
ELECTRICAL CHARACTERISCTICS
CW1128 1/0.5 PJ Filled Unarmoured
CONDUCTOR: Plain Copper
STRANDING: Class 1 BEDDING: PE
ARMOUR: Steel Wire Armour OUTERSHEATH COLOUR: Black
MINIMUM BENDING RADIUS: 10 x overall diameter
OPERATING TEMPERATURE:
0°C to +40°C* (*Maximum continuous temperature of standard jelly compound)
STANDARDS:
Generally complies with BT Specification CW1128/1198’
ELECTRICAL CHARACTERISCTICS
For 20 pairs and above the maximum mutual capacitance shall increase by 3nF/km
Discover wholesale electrical equipment & supplies on Africa's top B2B platform. Low MOQ, fast shipping, and competitive prices for reliable sourcing.