One Africa-One Market - Your Borderless B2B Sourcing Portal

Become a Merchant

Welcome To Zandaux

  • Vendor login
  • Track Your Order
  • Support
Sort by:
Megatron® ​HYDRAULIC OIL ISO HVI 32 Megatron® ​HYDRAULIC OIL ISO HVI 32
Megatron® ​HYDRAULIC OIL ISO HVI 32
Availability: In Stock

These are ‘super stabilized’ anti-wear hydraulic oils, with carefully controlled low temperature flow properties specifically designed to meet the requirements of the modern hydraulic systems including those where the equipment manufacturer specifies the use of anti-wear type hydraulic fluids. It contains a balanced selection of additives that afford multimetal compatibility, antirust, anticorrosion, anti-foam and anti-wear protection. These are combined to maintain the good air release, and water separation properties of the highly refined base oils. 


Benefits:

  • Superior wet and dry filterability.
  • Suitable for widely varying temperature conditions.
  • Good demulsibility for rapid separation of water.
  • Retains viscosity temperature characteristics in service.
  • Multimetal compatibility (except for silver components).
  • Good demulsibility for rapid separation of water.

Specifications, Performance Standards & Recommendations:

  • DENISON HF-O/HF-2
  • VICKERS M-2950-S
  • AFNOR NF-E 48-603 (HM/HV)
  • DIN 51524 Part 2 & 3
  • CINCINATI MILICRON P68-69-70
  • GM LS2
  • ASTM D6158 Type HM & HV
  • ISO 11158 (HM/HV)
  • New
Megatron® HYDRAULIC OIL ISO HVI 46​ Megatron® HYDRAULIC OIL ISO HVI 46​
Megatron® HYDRAULIC OIL ISO HVI 46​
Availability: In Stock

These are ‘super stabilized’ anti-wear hydraulic oils, with carefully controlled low temperature flow properties specifically designed to meet the requirements of the modern hydraulic systems including those where the equipment manufacturer specifies the use of anti-wear type hydraulic fluids. It contains a balanced selection of additives that afford multimetal compatibility, antirust, anticorrosion, anti-foam and anti-wear protection. These are combined to maintain the good air release, and water separation properties of the highly refined base oils. 


Benefits:

  • Superior wet and dry filterability.
  • Suitable for widely varying temperature conditions.
  • Good demulsibility for rapid separation of water.
  • Retains viscosity temperature characteristics in service.
  • Multimetal compatibility (except for silver components).
  • Good demulsibility for rapid separation of water.

Specifications, Performance Standards & Recommendations:

  • DENISON HF-O/HF-2
  • VICKERS M-2950-S
  • AFNOR NF-E 48-603 (HM/HV)
  • DIN 51524 Part 2 & 3
  • CINCINATI MILICRON P68-69-70
  • GM LS2
  • ASTM D6158 Type HM & HV
  • ISO 11158 (HM/HV)
  • New
Megatron® ​HYDRAULIC OIL ISO HVI 68​ Megatron® ​HYDRAULIC OIL ISO HVI 68​
Megatron® ​HYDRAULIC OIL ISO HVI 68​
Availability: In Stock

These are ‘super stabilized’ anti-wear hydraulic oils, with carefully controlled low temperature flow properties specifically designed to meet the requirements of the modern hydraulic systems including those where the equipment manufacturer specifies the use of anti-wear type hydraulic fluids. It contains a balanced selection of additives that afford multimetal compatibility, antirust, anticorrosion, anti-foam and anti-wear protection. These are combined to maintain the good air release, and water separation properties of the highly refined base oils. 


Benefits:

  • Superior wet and dry filterability.
  • Suitable for widely varying temperature conditions.
  • Good demulsibility for rapid separation of water.
  • Retains viscosity temperature characteristics in service.
  • Multimetal compatibility (except for silver components).
  • Good demulsibility for rapid separation of water.

Specifications, Performance Standards & Recommendations:

  • DENISON HF-O/HF-2
  • VICKERS M-2950-S
  • AFNOR NF-E 48-603 (HM/HV)
  • DIN 51524 Part 2 & 3
  • CINCINATI MILICRON P68-69-70
  • GM LS2
  • ASTM D6158 Type HM & HV
  • ISO 11158 (HM/HV)
  • New
Megatron® ​HYDRAULIC OIL ISO HVI 100​ Megatron® ​HYDRAULIC OIL ISO HVI 100​
Megatron® ​HYDRAULIC OIL ISO HVI 100​
Availability: In Stock

These are ‘super stabilized’ anti-wear hydraulic oils, with carefully controlled low temperature flow properties specifically designed to meet the requirements of the modern hydraulic systems including those where the equipment manufacturer specifies the use of anti-wear type hydraulic fluids. It contains a balanced selection of additives that afford multimetal compatibility, antirust, anticorrosion, anti-foam and anti-wear protection. These are combined to maintain the good air release, and water separation properties of the highly refined base oils. 


Benefits:

  • Superior wet and dry filterability.
  • Suitable for widely varying temperature conditions.
  • Good demulsibility for rapid separation of water.
  • Retains viscosity temperature characteristics in service.
  • Multimetal compatibility (except for silver components).
  • Good demulsibility for rapid separation of water.

Specifications, Performance Standards & Recommendations:

  • DENISON HF-O/HF-2
  • VICKERS M-2950-S
  • AFNOR NF-E 48-603 (HM/HV)
  • DIN 51524 Part 2 & 3
  • CINCINATI MILICRON P68-69-70
  • GM LS2
  • ASTM D6158 Type HM & HV
  • ISO 11158 (HM/HV)
  • New
Megatron® ​HYDRAULIC OIL ISO HVI 150​ Megatron® ​HYDRAULIC OIL ISO HVI 150​
Megatron® ​HYDRAULIC OIL ISO HVI 150​
Availability: In Stock

These are ‘super stabilized’ anti-wear hydraulic oils, with carefully controlled low temperature flow properties specifically designed to meet the requirements of the modern hydraulic systems including those where the equipment manufacturer specifies the use of anti-wear type hydraulic fluids. It contains a balanced selection of additives that afford multimetal compatibility, antirust, anticorrosion, anti-foam and anti-wear protection. These are combined to maintain the good air release, and water separation properties of the highly refined base oils. 


Benefits:

  • Superior wet and dry filterability.
  • Suitable for widely varying temperature conditions.
  • Good demulsibility for rapid separation of water.
  • Retains viscosity temperature characteristics in service.
  • Multimetal compatibility (except for silver components).
  • Good demulsibility for rapid separation of water.

Specifications, Performance Standards & Recommendations:

  • DENISON HF-O/HF-2
  • VICKERS M-2950-S
  • AFNOR NF-E 48-603 (HM/HV)
  • DIN 51524 Part 2 & 3
  • CINCINATI MILICRON P68-69-70
  • GM LS2
  • ASTM D6158 Type HM & HV
  • ISO 11158 (HM/HV)
  • New
Megatron® HYDRAULIC OIL ISO HVI 220​ Megatron® HYDRAULIC OIL ISO HVI 220​
Megatron® HYDRAULIC OIL ISO HVI 220​
Availability: In Stock

These are ‘super stabilized’ anti-wear hydraulic oils, with carefully controlled low temperature flow properties specifically designed to meet the requirements of the modern hydraulic systems including those where the equipment manufacturer specifies the use of anti-wear type hydraulic fluids. It contains a balanced selection of additives that afford multimetal compatibility, antirust, anticorrosion, anti-foam and anti-wear protection. These are combined to maintain the good air release, and water separation properties of the highly refined base oils. 


Benefits:

  • Superior wet and dry filterability.
  • Suitable for widely varying temperature conditions.
  • Good demulsibility for rapid separation of water.
  • Retains viscosity temperature characteristics in service.
  • Multimetal compatibility (except for silver components).
  • Good demulsibility for rapid separation of water.

Specifications, Performance Standards & Recommendations:

  • DENISON HF-O/HF-2
  • VICKERS M-2950-S
  • AFNOR NF-E 48-603 (HM/HV)
  • DIN 51524 Part 2 & 3
  • CINCINATI MILICRON P68-69-70
  • GM LS2
  • ASTM D6158 Type HM & HV
  • ISO 11158 (HM/HV)
  • New
Megatron® ​COMPRESSOR OIL ISO VG 32​​ Megatron® ​COMPRESSOR OIL ISO VG 32​​
Megatron® ​COMPRESSOR OIL ISO VG 32​​
Availability: In Stock

​Compressor safety Lubricants are resistant to the formation of deposits that could create fire and explosion hazards. Manufactured for paraffinic base stocks of High Viscosity Index, these properties are further enhanced by the incorporation of additives which gives these grades a unique control over oxidation, rust, corrosion and wear. 



Benefits:

  • Superior oxidation stability ensures extended drain intervals.
  • Reduced compressor deposits.
  • Reduced fire and explosion risks.
  • Reduced crankcase oil consumption.

Specifications, Performance Standards & Recommendations:

  • DIN 51 524, Part 2
  • Sperry Vickers I-286-S
  • AFNOR NFE 48603 (HM)
  • Cincinnati Machine P-68, P-69, P-70
  • Compressor Lubricants: DIN 51 506 VDL
  • Megatron Compressor Lubricant Range is recommended for Vacuum pumps and as R&O lubricants in other industrial oil applications.
  • Compressor 68 is suitable for use in rotary vane and screw compressors.
  • Compressor 68 and 220 are effective as "once-through" lubrication of reciprocating compressor cylinders as well as crankcases and some types of rotary compressors.
  • Compressor Oil is not recommended for breathing air or oxygen compression
  • Follow the compressor manufacturers recommendations for lubricant selection
  • New
Megatron® COMPRESSOR OIL ISO VG 46​ Megatron® COMPRESSOR OIL ISO VG 46​
Megatron® COMPRESSOR OIL ISO VG 46​
Availability: In Stock

​Compressor safety Lubricants are resistant to the formation of deposits that could create fire and explosion hazards. Manufactured for paraffinic base stocks of High Viscosity Index, these properties are further enhanced by the incorporation of additives which gives these grades a unique control over oxidation, rust, corrosion and wear. 



Benefits:

  • Superior oxidation stability ensures extended drain intervals.
  • Reduced compressor deposits.
  • Reduced fire and explosion risks.
  • Reduced crankcase oil consumption.

Specifications, Performance Standards & Recommendations:

  • DIN 51 524, Part 2
  • Sperry Vickers I-286-S
  • AFNOR NFE 48603 (HM)
  • Cincinnati Machine P-68, P-69, P-70
  • Compressor Lubricants: DIN 51 506 VDL
  • Megatron Compressor Lubricant Range is recommended for Vacuum pumps and as R&O lubricants in other industrial oil applications.
  • Compressor 68 is suitable for use in rotary vane and screw compressors.
  • Compressor 68 and 220 are effective as "once-through" lubrication of reciprocating compressor cylinders as well as crankcases and some types of rotary compressors.
  • Compressor Oil is not recommended for breathing air or oxygen compression
  • Follow the compressor manufacturers recommendations for lubricant selection
  • New
Megatron® ​COMPRESSOR OIL ISO VG 68​ Megatron® ​COMPRESSOR OIL ISO VG 68​
Megatron® ​COMPRESSOR OIL ISO VG 68​
Availability: In Stock

Compressor safety Lubricants are resistant to the formation of deposits that could create fire and explosion hazards. Manufactured for paraffinic base stocks of High Viscosity Index, these properties are further enhanced by the incorporation of additives which gives these grades a unique control over oxidation, rust, corrosion and wear. 



Benefits:

  • Superior oxidation stability ensures extended drain intervals.
  • Reduced compressor deposits.
  • Reduced fire and explosion risks.
  • Reduced crankcase oil consumption.

Specifications, Performance Standards & Recommendations:

  • DIN 51 524, Part 2
  • Sperry Vickers I-286-S
  • AFNOR NFE 48603 (HM)
  • Cincinnati Machine P-68, P-69, P-70
  • Compressor Lubricants: DIN 51 506 VDL
  • Megatron Compressor Lubricant Range is recommended for Vacuum pumps and as R&O lubricants in other industrial oil applications.
  • Compressor 68 is suitable for use in rotary vane and screw compressors.
  • Compressor 68 and 220 are effective as "once-through" lubrication of reciprocating compressor cylinders as well as crankcases and some types of rotary compressors.
  • Compressor Oil is not recommended for breathing air or oxygen compression
  • Follow the compressor manufacturers recommendations for lubricant selection
  • New
Megatron® ​COMPRESSOR OIL ISO VG 100​ Megatron® ​COMPRESSOR OIL ISO VG 100​
Megatron® ​COMPRESSOR OIL ISO VG 100​
Availability: In Stock

​Compressor safety Lubricants are resistant to the formation of deposits that could create fire and explosion hazards. Manufactured for paraffinic base stocks of High Viscosity Index, these properties are further enhanced by the incorporation of additives which gives these grades a unique control over oxidation, rust, corrosion and wear. 



Benefits:

  • Superior oxidation stability ensures extended drain intervals.
  • Reduced compressor deposits.
  • Reduced fire and explosion risks.
  • Reduced crankcase oil consumption.

Specifications, Performance Standards & Recommendations:

  • DIN 51 524, Part 2
  • Sperry Vickers I-286-S
  • AFNOR NFE 48603 (HM)
  • Cincinnati Machine P-68, P-69, P-70
  • Compressor Lubricants: DIN 51 506 VDL
  • Megatron Compressor Lubricant Range is recommended for Vacuum pumps and as R&O lubricants in other industrial oil applications.
  • Compressor 68 is suitable for use in rotary vane and screw compressors.
  • Compressor 68 and 220 are effective as "once-through" lubrication of reciprocating compressor cylinders as well as crankcases and some types of rotary compressors.
  • Compressor Oil is not recommended for breathing air or oxygen compression
  • Follow the compressor manufacturers recommendations for lubricant selection
  • New
Megatron® ​HEAT TRANSFER OIL ISO VG 22​ Megatron® ​HEAT TRANSFER OIL ISO VG 22​
Megatron® ​HEAT TRANSFER OIL ISO VG 22​
Availability: In Stock

Megatron Heat Transfer Oil Range is a highly refined, thermal stable, mineral oil- type heat transfer range formulated with premium hydrocracked base oils for use in heat transfer systems with forced circulation.


Specifications, Performance Standards & Recommendations:

This range is recommended for the use in heat transfer systems where fuel oil, gas or electricity is used to heat a fluid, which then transfers the heat to the point of application .Can be used for used in both closed and open heat transfer systems with forced circulation where a mineral- type heat transfer fluid is required. Copper and copper alloys should not be used in heat transfer systems with a hydrocarbon fluid unless air (oxygen) is excluded from contact with the fluid by hermetic sealing and/ or an inert gas “blanket”.

NOTE FOR OPEN SYSTEMS: Due to oxidation which is increased in open systems due to the exposure to oxygen, the life of any mineral oil, in any open system declines rapidly at temperatures beyond the region of 100 ̊ C. therefore, a reduced service life must be expected for these oils at higher temperatures in open systems.


Benefits:

  • Excellent resistance to deposit formation.
  • Exceptional thermal stability and good oxidation resistance.
  • Reduced evaporative loss due to low volatility and high flash points.
  • Good rust and corrosion protection.
  • New
Megatron® ​HEAT TRANSFER OIL ISO VG 32​ Megatron® ​HEAT TRANSFER OIL ISO VG 32​
Megatron® ​HEAT TRANSFER OIL ISO VG 32​
Availability: In Stock

Megatron Heat Transfer Oil Range is a highly refined, thermal stable, mineral oil- type heat transfer range formulated with premium hydrocracked base oils for use in heat transfer systems with forced circulation.


Specifications, Performance Standards & Recommendations:

This range is recommended for the use in heat transfer systems where fuel oil, gas or electricity is used to heat a fluid, which then transfers the heat to the point of application .Can be used for used in both closed and open heat transfer systems with forced circulation where a mineral- type heat transfer fluid is required. Copper and copper alloys should not be used in heat transfer systems with a hydrocarbon fluid unless air (oxygen) is excluded from contact with the fluid by hermetic sealing and/ or an inert gas “blanket”.

NOTE FOR OPEN SYSTEMS: Due to oxidation which is increased in open systems due to the exposure to oxygen, the life of any mineral oil, in any open system declines rapidly at temperatures beyond the region of 100 ̊ C. therefore, a reduced service life must be expected for these oils at higher temperatures in open systems.


Benefits:

  • Excellent resistance to deposit formation.
  • Exceptional thermal stability and good oxidation resistance.
  • Reduced evaporative loss due to low volatility and high flash points.
  • Good rust and corrosion protection.
  • New
Megatron® ​MOULD RELEASE OIL (NEAT)​​​ Megatron® ​MOULD RELEASE OIL (NEAT)​​​
Megatron® ​MOULD RELEASE OIL (NEAT)​​​
Availability: In Stock

Applications and Preparation: 


Megatron Mould Release Oil is recommended as a non-staining concrete release agent that provides exceptional releasing properties. It is applied neat as a coating on the insides of mould surfaces and shutters to be filled with cement or concrete. Incorporated in the blend are special additives to ensure smooth release and finishes on a wide variety of manufacturing and building applications. It is compatible with Non-absorbent materials, aluminium, steel and fiberglass.

 

Surfaces should be clean before application. Remove previous build-up of concrete, rust, scale and dirt. DO NOT DILUTE.  It may be applied by brush, roller, spray or dripping on forms immediately before pouring concrete. Must be kept off reinforcing steel. Estimated coverage up to 60m2 per litre depending porosity.


Benefits:

  • Ensures a clean, smooth finish
  • Enables quick, easy removal from the mould
  • Good anti-rust properties (for steel moulds)
  • Good spray ability and mould wetting capability
  • New
Megatron® Shutter Release Oil Megatron® Shutter Release Oil
Megatron® Shutter Release Oil
Availability: In Stock

Megatron Shutter Release Oil is recommended as a non-staining concrete release agent that provides exceptional releasing properties. It is applied neat as a coating on the insides of mould surfaces and shutters to be filled with cement or concrete. Incorporated in the blend are special additives to ensure smooth release and finishes on a wide variety of manufacturing and building applications. It is compatible with Non-absorbent materials, .aluminium, steel and Fiberglass.

 

Surfaces should be clean before application. Remove previous build-up of concrete, rust, scale and dirt. DO NOT DILUTE.  It may be applied by brush, roller, spray or dripping on forms immediately before pouring concrete. Must be kept off reinforcing steel. Estimated coverage up to 60m2  per litre depending porosity.


Benefits:

  • Ensures a clean, smooth finish.
  • Enables quick, easy removal from the mould.
  • Good anti-rust properties (for steel moulds).
  • Good spray ability and mould wetting capability.
  • New
Megatron® Slideway Range 68 Megatron® Slideway Range 68
Megatron® Slideway Range 68
Availability: In Stock

Megatron’s Range of Slideway oils are specially designed for the lubrication of machine tools slides, feed mechanisms and tables. Blended using highly refined based stocks and special additives, to enhance the critical property of adhesion that reduces stick/slip.


Benefits:

  • Good slideway adhesion
  • Excellent frictional properties
  • Provides high levels of corrosion protection
  • Anti-wear additives prevents the wear of critical sliding surfaces
  • Can be used on all horizontal and vertical slide ways

Specifications, Approvals & Recommendations:

Megatron slideway range is recommended for lubricating the slide ways of machine tools, planers, lathes and the slides and guides of other types of machines where a tacky, non-corrosive EP lubricant is required.

This machine tool lubricant also meets the requirements of hydraulic systems, gear boxes and spindles in most machine tools ad is specially designed for table way lubrication, with emphasis on superior stick-slip properties

  • New
Wholesale Auto Parts & Accessories | Africa B2B Platform

Explore high-quality auto parts & accessories at Africa’s leading B2B platform. Fast shipping, competitive prices, and reliable wholesale suppliers.

busy...