Description
Taso watermarks is a special formulated detergent for cleaning watermarks and rust on chrome faucets and stainless steel.
Taso watermarks restores the shine.

Order Of Use
Apply with a piece of cloth on the affected areas and scrub, rinse off with plenty of water to reduce contact time.
Precautions
Use suitable gloves to avoid skin contact and goggles to protect eye/face contact.
In an event of contact, flush with plenty of water and seek medical attention

Description:

Taso disinfectant contains very effective disinfecting compounds against bacteria and fungi. Use the product on floors, public toilets and other surfaces that are frequently used.

 Directions:

Dilute 100 ml into 10 liters of clean water for the disinfection of homes, hospital floors, toilet floors and seats.

Use 100ml into 15 liters of clean water to disinfect office floors, homes and other public places

Taso Sterilant is a broad-spectrum, non-foaming Sterilant liquid. It is used in sterilizing operations in food areas, especially in the dairy, beverage, and food processing industries. It can also be used as a sanitizer for sterilization of aseptic processing packaging equipment.

APPLICATION/USAGE:
Sanitizing of food contact surfaces: before sanitizing, remove food particles, wash with a detergent solution, followed by a water rinse. Sterilize with Taso at a concentration of 0.2-0.4%. Taso may be used as a sanitizing rinse for returnable and non-returnable bottles at a concentration of 0.2%. All surfaces should be exposed to the sterilizing solution for about 2 minutes. Drain thoroughly and allow to air dry as no further rinse is required.

SAFETY AND HANDLING:
Use suitable gloves to avoid skin contact and goggles to protect eye/face contact.
In an event of contact, flush with plenty of water and seek medical attention

Keep away from children.
Store in original container away from extreme temperatures

Taso C.I.P is a heavy duty alkaline detergent for bottle washing and CIP cleaning in soft drink plants, breweries, dairies and food processing industries in all water hardness areas.

APPLICATION/USAGE:

Soft drink plants and breweries: Taso C.I.P is suitable for all bottle washers. Concentration depends on the type of soiling a rate of 2-3% is deal.

CIP CLEANING:

A Solution of C.I.P may be used either or cold in CIP systems. The concentration may vary with the degree of soiling , a 1.0-2.0% sodium hydroxide solution is adequate, but with heavy soiling,
a solution of 5% may ne desired.

DAIRY PLANTS CLEANING:

Use Taso C.I.P at 1.0-2.0% at a temperature of 70-80 degrees for CIP cleaning operations.

SAFETY AND HANDLING:
Consult the MSDS. Keep away from children.
It is corrosive: wear protective clothing and rubber gloves when handling this product.

60L Capacity
7M outlet pipe
Ideal for carwash business
Steel tank
Can withstand high pressure