- Break glass activation
- Laminated glass to ensure no sharp edges
- Replaceable glass panels
- Reset tool
- Compatible with all conventional fire alarm systems
- Can be used with addressable fire alarm system when used in conjunction with monitor module
A concrete vibrator is a machine that is used to move the concrete after it has been poured to ensure that the little air pockets that form are removed. There are different types of concrete vibrators including; internal vibrators (poker vibrators), external vibrators, vibrating tables and surface vibrators.
A concrete vibrator has a motor and an attached surface which vibrates to move the concrete. For a poker vibrator the part that is moved is called the needle while for a table vibrator it is the table top. A good concrete vibrator therefore is one with a reliable engine able to cause significant vibrations or movements that will cause the heavy concrete to move back and forth or up and down to compact during settlement.
The choice for the most suitable type of concrete vibrator depends solely on the needs. However, an internal or poker vibrator is the most commonly used type of vibrator and is more preferred.
Quality Hisaki Gasoline engine in Bulk at wholesale Price
Voltage:220V-240V~50/60Hz
Input power:1200W
No-load speed:26000rpm
Collet size:6,8mm,1/4″
Plunge capacity:0-30mm
With 1pcs coping ring
With 1pcs aluminum guide fence
With 1set paralle guide
With 1set carbon brushes
The SuperWand’s 360° detection field provides uniform sensitivity and tip pinpointing to detect weapons and other metal objects with extreme accuracy Three-color LED indication Green LED = ON Amber LED = LOW BATTERY Red LED = ALARM Controls Power switch (Audible / Off / Silent) Interference Elimination Switch Tuning Automatic Audio Frequency 2 kHz Warble Operating Temperatures -35º F (-37º C) to 158º F (70º C) Width 3.25" (8.3 cm) Thickness 1.25" (3.2 cm) Length 19" (48.3 cm) Total Weight 18.6 oz (527 g) U.S. Pat. D459246S Battery Requirements one 9V (included). Provides up to 80 hours of normal operation. Warranty 2 Year, Limited Parts/Labor
Centralized Power Supply in Metal Casing CL1230 Output voltage: DC12V 20A Input voltage: AC110/220V ± 15% 8 individual output with PTC fuse protection (resettable) Grid frequency 50/60Hz ± 10% Peak - peak noise voltage ≤ 200mV Operating Frequency 100KHz Efficiency> 88% Electromagnetic compatibility reach BS6527B class standards, Dielectric strength AC1500V, 50/60Hz, 1 minute without discharge, arcing Operating temperature -20 -45
Material - The brush cutter gearbox is made of high quality aluminum alloy and steel. It is anti-rust, anti-corrosion and has excellent resistance to oxidation.
Specifications available - There are four sizes of reducer: 26mm inner diameter + 7 spline; 26mm inner diameter + 9 splines; 28mm inner diameter + 7 splines; Inner diameter 26mm + 9 splines. You can choose as needed.
Spare Part - The brush cutter gear head is the ideal accessory for the trimmer; it would be a great replacement for your old or broken ones.
Compatible - The brush cutter reducer can be used normally for brush cutters, trimmers, lawn mowers, etc. Easy to replace part, it is simple and convenient to connect the mower.
Wide applications - The lawn mower reducer has stable performance and good working conditions, ideal for gardening, agriculture , breeding, selection and forestry.
Power type | Single Cylinder, Two-stroke, Air-cooling |
Cylinder diameter | 45.2mm*34mm |
Engine Displacement | 54.5cc |
Rated output power | 2.2kW (3.0 hp) |
Relevant speed | 8000rpm |
Standard Bar Lengths | 20" (50.8cm) |
Chain pitch (inch) | 3/8"/.325" |
Chain Gauge | .058"/.063" |
Fuel mixture ratio | 25:1(Gasoline 25 : Two-cycle Oil 1) |
Fuel capacity | 550ml (19.4 oz.) |
Chain oil capacity | 260ml (9.2 oz.) |
Ignition system | Digital |
Dry weight (without bar and chain) | 5.0kg (11.0 lbs.) |
Weight (with bar and chain) | 6.0kg (13.2 lbs.) |
Box weight | 7.5kg (16.5 lbs.) |
Abrasion protected motor for increased durability
Two position side handle allows the user to optimise handle postion to give maxium comfort
Spindle lock for quick wheel changes
Brush window allows quick brush replacement.
The Makita 16mm (5/8") Hammer Drill has a strong motor. - It can be used for either rotation-only or hammering-with-rotation applications. - To assist with most projects, this hammer drill operates at 2,800 RPM and 44,800 BPM. - The hammer drill is lightweight and has a soft grip handle that makes it easy to hold. - The drilling capacity of this hammer drill is quite large. It comes with a lock-on button for continuous use. - Rotation in both directions - Trigger-controlled variable speed - Double insulation - Positive grip in-line design maximizes power thrust
The Makita HP1630 series of professional Combination Hammer Drills is now available. These percussion drills were designed to outperform the competition in terms of wattage, no-load speed, and impacts per minute. High performance is provided by the cylinder-shaped motor housing and the aluminum gear housing cover. Because of its light weight, it is ideal for horizontal serial drilling for coring and chipping in any mid to upper wall and ceiling application.
Home, Lights & Construction Suppliers & Wholesale Distributors. Find quality wholesale suppliers for Home, Lights & Construction.